PULSE GENERATORS
Key Features
- Lower footprint
- Versatile performance
- Compatible with a wide range of EDMs
- Easy, operator friendly use
25 A (Manual+)
Compact, table-top Controllers
| Power | 3 KVA |
| MRR Gr-St* | 180 mm3/min |
| MRR-Cu-St* | 140 mm3/min |
| Min Electrode Wear | 0.3 % |
| Max Electrode Weight | 50 Kg |
| Floor Area | 475 X 650 mm |
More Info
Specifications
| Power Supply | 415 V, 3 Phase, 50 Hz |
| Display | Digital Hand Pendant |
| Best Surface Finish* | 0.8 µ Ra |
| Pulse on time | 1 – 2000/11 steps (micro sec) |
*as per standard trial conditions
Features
- Convenient soft touch keypad to set pulse time, voltage, current, Z axis auto and manual speed
- Hand pendent with compact digital display to set multiple parameters
- Immediate error intimation message in case of operation errors
- Highly reliable, easy to maintain circuit with advanced design
- Faster deep cavity machining with high speed jump function
- Lowest electrode wear with faster, intelligent pulse control
- High speed lift
35 A (Manual+)
Compact, table-top controllers
| Power | 4 KVA |
| MRR Gr-St* | 280 mm3/min |
| MRR-Cu-St* | 230 mm3/min |
| Min Electrode Wear | 0.3 % |
| Max Electrode Weight | 50 Kg |
| Floor Area | 475 X 650 mm |
More Info
Specifications
| Power Supply | 415 V, 3 Phase, 50 Hz |
| Display | Digital Hand Pendant |
| Best Surface Finish* | 0.8 µ Ra |
| Pulse on time | 1 – 2000/11 steps (micro sec) |
*as per standard trial conditions
Features
- Convenient soft touch keypad to set pulse time, voltage, current, Z axis auto and manual speed
- Hand pendent with compact digital display to set multiple parameters
- Immediate error intimation message in case of operation errors
- Highly reliable, easy to maintain circuit with advanced design
- Faster deep cavity machining with high speed jump function
- Lowest electrode wear with faster, intelligent pulse control
- High speed lift
50 A (Manual+)
Convenient and efficient controls
| Power | 5 KVA |
| MRR Gr-St* | 400 mm3/min |
| MRR-Cu-St* | 300 mm3/min |
| Min Electrode Wear | 0.3 % |
| Max Electrode Weight | 50 Kg |
| Floor Area | 555 X 1000 mm |
More Info
Specifications
| Power Supply | 415 V, 3 Phase, 50 Hz |
| Display | Digital Hand Pendant |
| Best Surface Finish* | 0.8 µ Ra |
| Pulse on time | 1 – 2000/11 steps (micro sec) |
*as per standard trial conditions
Features
- Convenient soft touch keypad to set pulse time, voltage, current, Z axis auto and manual speed
- Hand pendent with compact digital display to set multiple parameters
- Immediate error intimation message in case of operation errors
- Highly reliable, easy to maintain circuit with advanced design
- Faster deep cavity machining with high speed jump function
- Lowest electrode wear with faster, intelligent pulse control
- High speed lift
65 A (Manual Analog)
Easy controls for powerful machining
| Power | 7 KVA |
| MRR Gr-St* | 700 mm3/min |
| MRR-Cu-St* | 400 mm3/min |
| Min Electrode Wear | 0.3 % |
| Max Electrode Weight | 50 Kg |
| Floor Area | 555 X 1000 mm |
More Info
Specifications
| Power Supply | 415 V, 3 Phase, 50 Hz |
| Display | – |
| Best Surface Finish* | 0.8 µ Ra |
| Pulse on time | 2 – 2000/10 steps (micro sec) |
*as per standard trial conditions
Features
- MOSFET Controller
- Variable setting for Motor feed sensitivity and speed by Potentiometer
50 A (ZNC)
Advanced, flexible controls
| Power | 5 KVA |
| MRR Gr-St* | 440 mm3/min |
| MRR-Cu-St* | 360 mm3/min |
| Min Electrode Wear | 0.2 % |
| Max Electrode Weight | 70 Kg |
| Floor Area | 600 X 550 mm |
More Info
Specifications
| Power Supply | 415 V, 3 Phase, 50 Hz |
| Display | 15″ LED |
| Best Surface Finish* | 0.8 µ Ra |
| Pulse on time | 2 – 2400 |
*as per standard trial conditions
Features
- Large program storage memory (over 20,000 programs)
- 10 segment auto editing function with Manual or AutoZ auto edit facility
Servo Motor - Automatic adjustment for unstable discharging condition
- Auto detection and adjustment of machine parameters to prevent arcing
- Industrial class PC BASE controller with new DOM type memory for faster and steady program reading
- Auto reset of machining conditions in case of Power off
70 A (ZNC)
Advanced, flexible controls
| Power | 7 KVA |
| MRR Gr-St* | 600 mm3/min |
| MRR-Cu-St* | 650 mm3/min |
| Min Electrode Wear | 0.2 % |
| Max Electrode Weight | 70 Kg |
| Floor Area | 600 X 550 mm |
More Info
Specifications
| Power Supply | 415 V, 3 Phase, 50 Hz |
| Display | 15″ LED |
| Best Surface Finish* | 0.8 µ Ra |
| Pulse on time | 2 – 2400 |
*as per standard trial conditions
Features
- Large program storage memory (over 20,000 programs)
- 10 segment auto editing function with Manual or AutoZ auto edit facility
Servo Motor - Automatic adjustment for unstable discharging condition
- Auto detection and adjustment of machine parameters to prevent arcing
- Industrial class PC BASE controller with new DOM type memory for faster and steady program reading
- Auto reset of machining conditions in case of Power off